An Rebote 2.5 Delay from Tonepad. The circuit board was etched and populated (second from the right):
It kicked my Boss DD-3 off my pedal board !!!
I liked it so much, I decided to build one for my upcoming multi-effects box. I make my PCBs by first drilling out the component holes using a template. I then join the dots with a permanent marker, then etch the board and finally clean it up with some wet-and-dry paper. Unfortunately, I had some problems with the etching on this batch and some of the traces are pretty poor:
This digital reverb was built from information found at General Guitar Gadgets. The reverb module is based on the Belton "brick", which contains several PT2399 delay chips. I used the medium delay module and am really pleased with it. It is mounted above the components on the circuit board. I had some problems with etching this batch of boards, so the traces were pretty poor and needed a little bit of patching :-(
Really nice sound - it's a keeper !
An analog delay, based on the Way Huge Aqua Puss